1
Hi, Guest!

  LOKASI :  SURABAYA

  AKTIVITAS :  13 hours ago

BAGIKAN :   

Bagikan :
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus [email protected] !
METROTAMA MODERN

DCP-FRCME-M - FAST RESPONSE CONTACT MODULE - HOCHIKI

Update Terakhir
:
07 / 08 / 2018
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:
Kami adalah perusahaan spesialis di bidang System Pemadam Kebakaran, Alarm kebakaran, alarm keamanan, CCTV, Sistem pemadaman api otomatis dengan menggunakan media gas yang ramah lingkungan, dll Fire Protection System : Fire Alarm ( Tyco, Thorn, Notifier, Simplex, Hochiki, GST, Appron, Hooseki, Nohmi, dll)

Detail DCP-FRCME-M - FAST RESPONSE CONTACT MODULE - HOCHIKI

DCP-FRCME-M - FAST RESPONSE CONTACT MODULE

 

SPECIFICATIONS

Supply Voltage (S-SC) 25.3 ~ 39 VDC

Average Current 339μA (Typical)

Consumption 358μA (Alarm)

Programmable Input 1 Monitoring Inputs

EOL Device 10K Ohms Resistor

Max. Quantity Per Loop 127

Dimensions 1.75"W x 2.37"H x 0.5"D

Operating Temperature 32°F (0°C) 120°F (49°C)

Mounting 2" electrical box

Relative Humidity 90% RH Non-Condsensing

 

STANDARD FEATURES

·        UL 864 9th Edition Listed

·        Single input contact monitor

·        Fast, reliable contact monitoring utilizing the

·        Hochiki DCP (Digital Communications Protocol)

·        127 devices can be used per DCP loop

·        Can be programmed to monitor Normally Open

·        (NO) or Normally Closed (NC) contacts

·        Operates on Class A or Class B SLC loop

·        Accepts up to 14 AWG wire

 

DESCRIPTION

 

The DCP-FRCME-M is a small design and is suitable

for mounting in a single gang box.

The Hochiki DCP-FRCME-M Fast Response Contact

Monitoring Modules are designed to be used with pull

stations, water flow switches, and other applications

requiring the monitoring of dry contact devices. The

interrupt driven Digital Communications Protocol (DCP)

combines maximum communication reliability and fast

response to emergency conditions. The DCP-FRCMEM

contact monitoring module does not require a separate

24 VDC power source.

Each addressable contact monitoring module is

programmed with its own unique Signaling Line

Circuit (SLC) loop address. The device address is

electrically programmable and stored in onboard

EEPROM. Up to 127 devices can be placed on the

Hochiki DCP SLC loop. The module supervises the wiring

to the contact with an End Of Line (EOL) resistor. It can

be programmed to monitor Normally Open (NO) or

Normally Closed (NC) contacts. If a fault condition

occurs in the wiring, the module sends a trouble status

signal to the fire alarm control panel. When a change of

status (contact changes state) is sensed by the DCPFRCME-

M, it sends an interrupt to the control panel

indicating that an alarm has occurred

Tampilkan Lebih Banyak
metrotama modern
metrotama modern

METROTAMA MODERN

PREMIUM GOLD 5 Tahun
Griya Kebraon Selatan V/E-20, Karangpilang Surabaya
Jawa Timur , Indonesia, SURABAYA
Indonesia 60222
SURABAYA
15 / 10 / 2019
Hubungi Kami

Detail DCP-FRCME-M - FAST RESPONSE CONTACT MODULE - HOCHIKI

DCP-FRCME-M - FAST RESPONSE CONTACT MODULE

 

SPECIFICATIONS

Supply Voltage (S-SC) 25.3 ~ 39 VDC

Average Current 339μA (Typical)

Consumption 358μA (Alarm)

Programmable Input 1 Monitoring Inputs

EOL Device 10K Ohms Resistor

Max. Quantity Per Loop 127

Dimensions 1.75"W x 2.37"H x 0.5"D

Operating Temperature 32°F (0°C) 120°F (49°C)

Mounting 2" electrical box

Relative Humidity 90% RH Non-Condsensing

 

STANDARD FEATURES

·        UL 864 9th Edition Listed

·        Single input contact monitor

·        Fast, reliable contact monitoring utilizing the

·        Hochiki DCP (Digital Communications Protocol)

·        127 devices can be used per DCP loop

·        Can be programmed to monitor Normally Open

·        (NO) or Normally Closed (NC) contacts

·        Operates on Class A or Class B SLC loop

·        Accepts up to 14 AWG wire

 

DESCRIPTION

 

The DCP-FRCME-M is a small design and is suitable

for mounting in a single gang box.

The Hochiki DCP-FRCME-M Fast Response Contact

Monitoring Modules are designed to be used with pull

stations, water flow switches, and other applications

requiring the monitoring of dry contact devices. The

interrupt driven Digital Communications Protocol (DCP)

combines maximum communication reliability and fast

response to emergency conditions. The DCP-FRCMEM

contact monitoring module does not require a separate

24 VDC power source.

Each addressable contact monitoring module is

programmed with its own unique Signaling Line

Circuit (SLC) loop address. The device address is

electrically programmable and stored in onboard

EEPROM. Up to 127 devices can be placed on the

Hochiki DCP SLC loop. The module supervises the wiring

to the contact with an End Of Line (EOL) resistor. It can

be programmed to monitor Normally Open (NO) or

Normally Closed (NC) contacts. If a fault condition

occurs in the wiring, the module sends a trouble status

signal to the fire alarm control panel. When a change of

status (contact changes state) is sensed by the DCPFRCME-

M, it sends an interrupt to the control panel

indicating that an alarm has occurred

Tampilkan Lebih Banyak