1
Hi, Guest!

DCP-AMS SERIES ADDRESSABLE MANUAL PULL STATIONS HOCHIKI

Update Terakhir
:
07 / 08 / 2018
Min. Pembelian
:
1 Unit
Kami adalah perusahaan spesialis di bidang System Pemadam Kebakaran, Alarm kebakaran, alarm keamanan, CCTV, Sistem pemadaman api otomatis dengan menggunakan media gas yang ramah lingkungan, dll Fire Protection System : Fire Alarm ( Tyco, Thorn, Notifier, Simplex, Hochiki, GST, Appron, Hooseki, Nohmi, dll)

Detail DCP-AMS SERIES ADDRESSABLE MANUAL PULL STATIONS HOCHIKI

DCP-AMS SERIES

ADDRESSABLE MANUAL PULL STATIONS

HOCHIKI

 

STANDARD FEATURES

Addressable integrated design

All metal construction

Single and dual action models available

Extremely easy to operate

Bi-colored status LED indicates Standby and

Alarm conditions

Address is programmable in EEPROM

Address can be programmed when installed

Key lock or hex key lock models available

Enclosed switch with glass rod (included)

Terminals accept up to 14AWG wire

Surface mount back box available

ADA compliant (except LP models)

 

SPECIFICATIONS

Operating Voltage (SLC) 17~41 VDC

Average Current Consumption 550uA (Typical)

660uA (Alarm)

Ambient Temperature 32°F (0 °C) ~ 120°F (49°C)

Maximum Humidity 90% RH, non-condensing

Dimensions 3.4"W x 4.8"H x 2.0"D

Mounting Single gang or 4" square

electrical box

 

MODEL DESCRIPTION

DCP-AMS Single Action Hex Key Lock

DCP-AMS-LP Dual Action Hex Key Lock

DCP-AMS-KL Single Action Key Lock

DCP-AMS-KL-LP Dual Action Key Lock

 

DESCRIPTION

The DCP-AMS are the Hochiki America series of

addressable manual pull stations that provide a fast and

practical means of manually initiating a fire alarm signal.

Both single action and dual action manual pull stations

are available. Resetting of the pull station requires either

a Cat 30 key or a 1/8" hex key (depending upon the

model used).

An alarm condition is actuated by pulling down on the

handle of the DCP-AMS and DCP-AMS-KL single action

models. On the dual action models DCP-AMS-LP and

DCP-AMS-KL-LP the Lift and Pull cover must be lifted

before pulling down on the pull station handle. Once

the pull station is activated, the handle cannot be put

back into a normal standby condition without using the

key operated reset feature.

The DCP-AMS series is electronically addressable and

includes a bi-colored status LED. The LED blinks green

indicating normal communication with the DCP

compatible SLC loop. When an alarm condition is

actuated by pulling the handle, the LED will latch Red

to indicate the alarm condition.

 

Tampilkan Lebih Banyak
metrotama modern
metrotama modern

METROTAMA MODERN

Anggota PREMIUM 5 Tahun
Griya Kebraon Selatan V/E-20, Karangpilang Surabaya Jawa Timur , Indonesia, SURABAYA
Indonesia 60222
SURABAYA
11 / 11 / 2019
Hubungi Kami

Detail DCP-AMS SERIES ADDRESSABLE MANUAL PULL STATIONS HOCHIKI

DCP-AMS SERIES

ADDRESSABLE MANUAL PULL STATIONS

HOCHIKI

 

STANDARD FEATURES

Addressable integrated design

All metal construction

Single and dual action models available

Extremely easy to operate

Bi-colored status LED indicates Standby and

Alarm conditions

Address is programmable in EEPROM

Address can be programmed when installed

Key lock or hex key lock models available

Enclosed switch with glass rod (included)

Terminals accept up to 14AWG wire

Surface mount back box available

ADA compliant (except LP models)

 

SPECIFICATIONS

Operating Voltage (SLC) 17~41 VDC

Average Current Consumption 550uA (Typical)

660uA (Alarm)

Ambient Temperature 32°F (0 °C) ~ 120°F (49°C)

Maximum Humidity 90% RH, non-condensing

Dimensions 3.4"W x 4.8"H x 2.0"D

Mounting Single gang or 4" square

electrical box

 

MODEL DESCRIPTION

DCP-AMS Single Action Hex Key Lock

DCP-AMS-LP Dual Action Hex Key Lock

DCP-AMS-KL Single Action Key Lock

DCP-AMS-KL-LP Dual Action Key Lock

 

DESCRIPTION

The DCP-AMS are the Hochiki America series of

addressable manual pull stations that provide a fast and

practical means of manually initiating a fire alarm signal.

Both single action and dual action manual pull stations

are available. Resetting of the pull station requires either

a Cat 30 key or a 1/8" hex key (depending upon the

model used).

An alarm condition is actuated by pulling down on the

handle of the DCP-AMS and DCP-AMS-KL single action

models. On the dual action models DCP-AMS-LP and

DCP-AMS-KL-LP the Lift and Pull cover must be lifted

before pulling down on the pull station handle. Once

the pull station is activated, the handle cannot be put

back into a normal standby condition without using the

key operated reset feature.

The DCP-AMS series is electronically addressable and

includes a bi-colored status LED. The LED blinks green

indicating normal communication with the DCP

compatible SLC loop. When an alarm condition is

actuated by pulling the handle, the LED will latch Red

to indicate the alarm condition.

 

Tampilkan Lebih Banyak
Kontak Kami  
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus [email protected] !